Printable version
Email this to a Friend
Made to measure looms for all kinds of boats
01 Jul 2006
To comply with the RCD regulation on voltage drop, all conductors have to be measured and a voltage drop calculation carried out prior to installation to ensure that the correct size cable is fitted (a painfully slow process if you are installing your conductors one at a time and, as such, prone to mistakes being made).
Loom-Tech says its unique system allows the boatbuilder to hand all the headaches over to them. All the builder then has to do is run the made to measure loom around the boat, sit back and relax, safe in the knowledge that everything is just as it should be.
Every loom is made to measure and has 105infinityC insulation as standard. The systems can be fitted to any type of boat and, if necessary, tinned cable can be specified.
Loom-Tech checks every single cable before assembly and delivers each loom trunked and ready to fit.
All looms are supplied complete with a full set of CE documentation, including wiring diagrams, conductor schedules, etc. And with the company's American Boat & Yacht Council (ABYC) certified staff, LoomTech can also make looms for the American market.
Loom-Tech. T/F: 01299 878967 E: sales@loomtech. co. uk
Images for this article - click to enlarge
Unless otherwise stated, all images copyright © Mercator Media 2008. This does not exclude the owner's assertion of copyright over the material.
Related products
For more information on products mentioned within this article visit
